Having Your Wood Floors Finished with White Wash Effect

This modern finish is getting more and more popularbased stain along the stretch of the grain. Speed of
for both wooden furniture and wood floors. Usuallyapplication is essential and the stain may be more
people would go for this kinf staining effect on theevenly achieved by 2 people. See direction of Ronseal
floors to match a lighter furniture or to achieve feelingfor the drying time of the product - 1 hour should be
of a larger space in smaller sized rooms.more than enough before application of the sealing
There are few ways to achieve a white wash effectcoats of clear varnish.
on your wooden floors. Depending on the sealant youProbably the best effect with this type of stain will be
have decided to use on the floors you can either goachieved with Matt finish.
for wax based stains, solvent based stain or usingWhite Wash Effect with Shots of Acrylic Colourant
acrylic colourant mixed with the lacquer you will beAnother tested way of doing the white wash effect is
sealing.mixing shots of colourant directly into the varnish. Take
White Wash Effect with Osmo Polyx-Oila 1L bottle and fill with 0.9L varnish. Add a shots of
After the floors are sanded down to a minimum ofacrylic colourant - white, these are widely available in
80G, prepare the floors for staining with a light buffing25ml bottles through decorators merchants such as
round. Apply a coat of Osmo Polyx-Oil White (3040) -Leyland SDM.
recommended brush application for a thicker, betterAdd another shot to achieve more intense colour. You
covering colour. Application with a soft pad and rotarymay also go for double coat of coloured varnish or
machine will have a slightly lighter effect, but may saveseal the colour from the first coat with another 2
time if that's acceptable.coats of clear satin, mott or gloss.
Apply another coat or 2 coats of clear OsmoThe acrylic colourants are available in a wide range of
Polyx-Oil in Satin or Matt finish, to your preference.colours, meaning you can achieve not only "white"
These should be applied by brush.wash effect with them.
White Wash Effect with "Ronseal White Wash"Probably the easiest way of completing the effect.
This type of stain is applied as any other solvent